This month’s video is a succession of clips recorded with EV’s Slickline Memory camera where a customer in South East Asia progressed through their recovery operation, progressively understanding the exact conditions throughout the different stages.
No special preparation was required as the jobs were run in a dry gas environment.
After a first run that accurately identified the top of wire, a wire cutter was run in hole and held up at an unexpected depth. The pin had to be sheared to release the cutter and the next camera run identified a slickline bird nest.
With this information, a significant amount of slickline was recovered and another camera was run to assess the results. The new top of fish, a slickline fishing head is clearly seen, followed by the top of a sidewall cutter.
After latching onto the sidewall cutter, another camera is run. This time, the sidewall cutter is found centred, which allowed the correct selection of fishing tools.
On recovering the sidewall cutter, another camera was run to check the condition of the wire below it. The last segment of video shows yet another slickline bird nest.
After multiple runs and several days, the customer successfully concluded the operation relying throughout on EV’s Slickline Memory Camera, a battery powered optical camera that records up to 5 hours of HD colour video images at 30 frames per second. Acquisition, as in this case, can be continuous; however the tools can also be programmed to record as many as 60 segments, an efficient and cost effective solution to diagnosing complex or changing downhole conditions over an extended period of time.